RPM Steering 2007 2018 Front ORI Strut Towers Pair Jeep Wrangler JK/JKU - RPM-3020
Strut Tower Braces
2007-2018 Front ORI Strut Towers Jeep Wrangler JK/JKU. Our RPM Steering ORI towers are designed with a slight lean outward to allow a 14 Inch ORI full range of motion without a need for notching the frame on a JK/JKU.
In addition, we run an 8.5 inch wide base so that the ORI will Not rub on the tower when moving front to rear. These 1/4 Inch steel towers are weld in ready for your JK ORI build.
Please Note:
- It comes with pre-welded top cap and shock tabs. Ready to weld to the frame.
- These towers require full-width Axles. It does Not work on stock width JK Axles.
- Sold as a pair.
- Shock tabs are 1/2 inch bolt holes.
Description
2007-2018 Front ORI Strut Towers Jeep Wrangler JK/JKU. Our RPM Steering ORI towers are designed with a slight lean outward to allow a 14 Inch ORI full range of motion without a need for notching the frame on a JK/JKU.
In addition, we run an 8.5 inch wide base so that the ORI will Not rub on the tower when moving front to rear. These 1/4 Inch steel towers are weld in ready for your JK ORI build.
Please Note:
- It comes with pre-welded top cap and shock tabs. Ready to weld to the frame.
- These towers require full-width Axles. It does Not work on stock width JK Axles.
- Sold as a pair.
- Shock tabs are 1/2 inch bolt holes.
Details
- RPM-3020
- RPM-3020
- RPM Steering
- Available to Order
- New
Categories
Shipping Information
- Item Requires Shipping
- 23.0 lbs.
- W10.0000” x H10.0000” x L30.0000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!