Artec Industries JK 1 Ton 14 Bolt 52 Tooth Tone Ring - BB1401
Tone Ring
BB1401
Tone Ring
Availability: Available to Order
Pricing:
$54.99
Description
Complete your 1 Ton Swap off by providing the JK computer correct data and eliminating codes and limp mode issues. Use of this Kit may require an optional tuner which has access to adjusting Gear Ratio and Tire size. Your actual programmer settings may differ from the axle ratio and tire size on your vehicle depending on Tone ring tooth count used. If using the 60 tooth option, speedometer may be off 1 - 3 percent. Laser Cut For precision reading from ABS Sensor. Requires machining of Hub and pressing on over machined surface.
Details:
- Zinc plated For corrosion resistance and improved sensor feedback
- This Kit Is Intended For Use With A Newer Style 14 Bolt Axle With Tibbing On The Casting And Has A WMS-WMS Measurement Of 68 Inch or Greater.
- This axle is referred to as an AAM 14 bolt 10.5 inch ring gear and is found Inch 99-06 GM 2500 and 3500 SRW trucks.
- 14 Bolt Axle with Factory Drum Brakes
- BB1420: Kit BB1410 with 52 Tooth Tone rings
- BB1421: Kit BB1410 with 60 Tooth Tone rings
- This Kit has 2 mounting positions per side For Factory JK Rear ABS Sensors. One from each side will connect to the rear plugs and the other 2 need to be spliced into the front plugs. If using any axle than the 2005 plus Superduty, this is the best option.
- If using 2005 - 2013 Superduty Front Dana 60 Axle only 2 Rear Sensors can be installed and the front will use the Dodge ABS Sensors and the 60 Tooth Tone Rings
- Dodge ABS Sensors – Chrysler P/N 5179958AB, Dorman P/N 970-052, or Airtec P/N 5S8491
- Individual parts that are Inch this Kit and available separately:
- BB1410: Brake brackets and Dust shield
- BB1401: 52 Tooth Tone ring 14 bolt
- BB1403: 60 Tooth Tone ring 14 bolt
- Additional items required and not included with Kit:
- Please note this converts to a Top Hat Style Rotor
- Calipers (Choose one of the items listed below)
- Raybestos RC4072 and RC4071
- Napa N4674 and N4673
- Napa N4597 and N4596
- Wheel Studs
- Dorman P/N 610-333 – 16 of these are needed(10.9/333 14 x 1.5mm 90.5 mm long)
- Rotors (Choose one of the items listed below with a Quantity of 2)
- Network P/N P56828
- Raybestos P/N 55055
- Bendix P/N PRT5260
- 58828
- 14 Bolt Rear Axle with Factory Disc Brakes
- BB1430: BB1411 ABS Sensor Mount and 52 Tooth Tone rings
- BB1431: BB1411 ABS Sensor Mount and 60 Tooth Tone rings
Details
- BB1401
- BB1401
- Artec Industries
- Available to Order
- New
Categories
Shipping Information
- Item Requires Shipping
- 1.0 lbs.
- W7.0000” x H2.0000” x L7.0000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!